A-A-54143
supplies to which such records relate.
Inspection. Inspection, as used herein, is defined as both examination (such as visual or auditory investigation without the use of special laboratory appliances or procedures) and testing (determination by technical means of physical and chemical properties) of the item.
Sampling for tests. (cloth)
The sampling for the testing of the blanket cloth shall be as follows:
|
Lot size (cloth yards) |
Sample size |
|
800 or less |
2 |
|
801 up to and including 22,000 |
3 |
|
22,001 and over |
5 |
The sample unit of cloth for test purposes shall be one linear yard of the cloth. The samples shall be taken from the beginning of each roll. The lot shall be unacceptable if one or more sample units fail to meet any of the fabric property requirements. Physical tests required for the cloth may be performed on samples taken from the assembled blankets. To determine the number of blankets (sample size) to be taken for testing of the cloth, substitute blankets for yards in lot size.
Sampling for tests. (blanket)
Sampling for tests including dimensional test, shall be conducted in accordance with MIL-STD-105, with an AQL of 4.0 (percent defective) and an inspection level of S-3. The unit of product for test purposes shall be one bed blanket.
Tests.
Tests shall be conducted to determine compliance with specification requirements. Where feasible, the same sample shall be used for the determination of two or more test characteristics.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business